Advertisement
Figure 12
1. Flange-head bolt (5/16 x
1-1/2 inches)
2. Tube-clamp halves
3. Cable tie
4. Hydraulic hose (3/8 x 79
inches)
5. Left frame channel
(machine)
6. Hydraulic hose (3/8 x 61
inches)
Installing the Hydraulic Hoses
1. Connect the male quick-connect coupler of the
hydraulic hose (3/8 x 79 inches) into the female
quick-connect coupler of the pressure hose for the
boom-lift manifold that you identified in step
shown in
Figure
1. Hydraulic hose (3/8
x 79 inches—male
quick-connect coupler)
2. Boom-lift manifold
hose—pressure (female
quick-connect coupler)
3. Hydraulic hose (3/8
x 61 inches—female
quick-connect coupler)
2. Connect the female quick-connect coupler of the
hydraulic hose (3/8 x 61 inches) onto the male
quick-connect coupler of the tank hose for the
boom-lift manifold that you identified in step
shown in
Figure
3. Remove the cap from the T-fitting in the hydraulic tube
next to the hydraulic-oil filter as shown in
7
13.
Figure 13
4. Boom-lift manifold
hose—tank (male
quick-connect coupler
5. Front of the machine
13.
Figure
1
as
1
as
14.
Advertisement
