Advertisement
Figure 14
1. Cap
2. T-fitting (hydraulic tube)
4. Assemble the 90° fitting of the hydraulic hose (3/8 x
61 inches) to the T-fitting
swivel nut of the hose to 37 to 45 N∙m (27 to 33 ft-lb).
5. Remove the cap from the T-fitting of the hydraulic
tube fitting next to the engine-air filter as shown in
Figure
15.
3. 90° fitting—hydraulic hose
(3/8 x 61 inches)
4. Hydraulic-oil filter
(Figure
14) and torque the
1. T-fitting (hydraulic tube)
2. Engine-air filter
6. Assemble the straight fitting of the hydraulic hose (3/8
x 79 inches) onto the hydraulic tube fitting and torque
the swivel nut of the hose to 37 to 45 N∙m (27 to 33
ft-lb).
7. Secure the hoses with flange-head bolt (5/16 x 1-1/2
inches), 2 tube-clamp halves, and 2 cable ties at the
locations shown in
Hoses (page
6).
8
Figure 15
3. Cap
4. Hydraulic hose (3/8 x 79
inches)
Figure 12
of
Routing the Hydraulic
Advertisement
