Table of Contents
Advertisement
Figure 3
1. Axle assembly
2. Right ramp assembly
3. Bolt (3/8 x 3 inches)
Figure 4
1. Axle assembly
2. Right rail assembly
3. Bolt (3/8 x 3 inches)
g215364
4. Washer
5. Nut
g215363
4. Washer
5. Nut
Mounting the Wheel
Assemblies
1.
Mount a wheel assembly to each axle hub with
4 lug nuts
(Figure
N⋅m (80 ft-lbs).
2.
Adjust the tire pressure to 5 psi (34 kPa).
1. Axle
Important:
Higher tire pressure may
damage the machine.
Mounting and Adjusting the
Hitch Straps
The hitch straps are shipped mounted in the standard
position
(Figure
6).
Important:
The trailer tongue must be parallel to
the ground when it is aligned with the tow vehicle
hitch.
Standard position
3
5). Tighten the nuts to 108
Figure 5
2. Wheel assembly
Figure 6
g014665
g014666
Advertisement
Table of Contents
