Toshiba B-850 Owner's Manual page 97

APPENDIX 4 SYSTEM MODE
A4.6 PCL Emulation
Setting (Cont.)
NOTE:
Cut issue is available only
when the optional cutter
module (B-7208-QM) is
installed. When you need the
cutter, please contact your
nearest TOSHIBA TEC service
representative.
NOTE:
If holding the [RESTART] or
[FEED] key for 0.5 seconds or
longer in the parameter
setting, the key is entered
continuously.
Issue Mode Selection
With this parameter select the Issue Mode for the PCL Emulation.
[RESTART]
[FEED]
After selecting the issue mode, press the [PAUSE] key to show the
Media Size Selection menu.
Media Size Selection
With this parameter select the Media Size for the PCL Emulation.
[RESTART]
[FEED]
After selecting the media size, press the [PAUSE] key.
When "A4", "LEGAL", or "LETTER" is selected, the display returns to
"<8>PCL EMULATION".
When "USER" is selected, the Media Width Setting menu is displayed.
Media Width Setting
[RESTART]
[FEED]
[FEED] key: Pressing the [FEED] key one time causes a –1 change, up
to 100.
[RESTART]key: Pressing the [RESTART] key one time causes a +1
change, up to 2168.
After selecting the media width, press the [PAUSE] key to show the
Media Length Setting menu.
A4-21
A4.6 PCL Emulation Setting
Batch mode with
no cut.
Cut mode.
A4 Size
Customize
Letter Size
Legal Size
Media width (Unit: 0.1mm)
EO1-33029