Advertisement
GardenShed
Step 4:
Assemble the roof panels
Step 4: Assemble the roof panels
Place parts S16, S27 and S17 (sheeting) on your worktable and join together with self-tapping screws as per the diagram below.
Place parts S16, S27 and S17 sheeting on your worktable and join together with self tapping screws as per the diagram below.
ROOF TOP EDGE
Fix parts 26F, 26E, 26A and 26B (channels) using self tapping screws as per the diagram below. Make sure the small lip on the channel is
Fix parts 26F, 26E, 26A and 26B (channels) using self-tapping screws as per the diagram below. Please ensure parts 26A and 26B
always facing out. This ensures rain water can not build up inside the shed.
are attached to the side of sheeting which has pre-punched holes as per the diagram below. Make sure the small lip on the channel is
always facing out. This ensures rain water cannot build up inside your shed.
ROOF TOP EDGE
RIDGES FACING UP
Enhance the structural strength by applying part 66 (channel connector). Note that screws are applied to both sides of the connectors.
Enhance the structural strength by applying part 66 (channel connector). Note that screws are applied to both sides of the connectors.
© Jack Sealey Limited
2.3 x 2.3 x 2.4m
S27
S16
RIDGES FACING UP
66
26F
26A
Original Language Version
S17
26E
66
26B
GSS2323/G | Issue:2(SP) 13/04/17
Advertisement
