Advertisement
Step 2:
Assemble the rear wall panels
Step 2: Assemble the rear wall panels
You will find it easier to assemble your shed using sawhorses with timber studs attached (timber needs to be the same length as the
You will find it easier to assemble your shed using saw horses with timber studs attached (the timber needs to be the same length as the
Shed (2.3m) or alternatively a trestle table.
shed (2.3m)) or alternatively, a trestle table.
Place 3 x part 9F (sheeting) on your work table and join together with self tapping screws as per the diagram below ensuring the ridges are
Place 3 x part 9F (sheeting) on your worktable and join together with self-tapping screws as per the diagram below ensuring the
facing up.
ridges are facing up.
Tip: If panel and screw holes do not line up, try pulling panel to match up holes.
© Jack Sealey Limited
ROOF TOP EDGE
9F
Tip: If panel and screw holes do not line up, try pulling panel to match up holes.
Original Language Version
9F
RIDGES FACING UP
9F
GSS2323/G | Issue:2(SP) 13/04/17
Advertisement
