Advertisement
Step 7: Fit the panels together continued
Step 7:
Fit the panels together (continued)
Join 2 x part 62 (ridge beam) with the end marked with the red arrow using part 67 (ridge beam connector). Put on 2 x part E2 (gable cap) and
join them using part E3 (gable cap connector). Fix this structure using the provided 16mm self tapping screws.
Join 2 x part 62 (ridge beam) with the end marked with red arrow using part 67 (ridge beam connector). Put on 2 x part E2 (gable
cap) and join them using part E3 (gable cap connector). Fix this structure using the provided 16mm self-tapping screws.
RED ARROW END
REDA RROW END
PARTS 26A AND
CHANNELT YPE 26A
26B (CHANNELS)
AND 26BT HISE ND
ON THIS END
Slide the side of the roof panel with channels 26E and 26F into the ridge beam.
Slide the side of the roof panel with channels 26E and 26F into the ridge beam.
© Jack Sealey Limited
E2
PARTS 26E AND
CHANNELT YPE 26E
26F (CHANNELS)
AND 26FT HISE ND
ON THIS END
Original Language Version
62
67
62
E3
E2
FIX WITH 16MM
FIX IT WITH 16mm
SELF-TAPPING SCREWS
SELF-TAPPING SCREWS
GSS2323/G | Issue:2(SP) 13/04/17
Advertisement
