Using Partitions; Figure 3.7 Fc Switch Connection, A Cluster System Configuration - Fujitsu Storage ETERNUS LT140 User Manual

Chapter 3 Connections

3.4 Using Partitions

■ Cluster system
The following figure shows an example of zoning when the LT140 is connected to a cluster system (standby
configuration). Both servers recognize the LT140 controller and drives as the same configuration.

Figure 3.7 FC switch connection, a cluster system configuration

Server A (operating)
Backup software
FC switch
3.4 Using Partitions
If using partitions you can connect multiple servers. Each server will handle the Partition of the LT140 like an
independent Library, no exchange between Partitions is possible by using Backup Software. If partitions are
create, each master drive can control the library.
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Site Planning-
Server B (standby)
0 2 4
1 3 5
Controller
LT140
FC cable
Zoning for Fibre Channel for server A
Zoning for Fibre Channel for server B
Copyright 2018 FUJITSU LIMITED
Backup software
6
45
P3AG-3712-01ENZ0