Checking The Tire Pressure; Checking The Engine Oil Level; Checking The Torque Of The Wheel Lug Nuts - Toro Z Master 8000 Series Setup Instructions

Figure 15
1. Bolts
4. Fold the guard forward.
5. Install the metal guards with the attached bolts
shown in Figure 16.
Figure 16
1. Guard attached to the
mower deck
2. Bolts
6. Install the rubber guard with the bolts
15).
g036545
2. Rubber guard
g035552
3. Metal guards
(Figure
5

Checking the Tire Pressure

No Parts Required
Procedure
Pressure: 103 kPa (15 psi)
Note:
Check the tire pressure before starting the
machine. Refer to your Operator's Manual for the
correct tire type, correct air pressure needed, and
procedure.
6
Checking the Engine-Oil
Level
No Parts Required
Procedure
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer
to Servicing the Engine-Oil Level in the Operator's
Manual.
7
Checking the Torque of the
Wheel Lug Nuts
No Parts Required
Procedure
Before you start the engine and use the machine,
check the wheel lug nut torque; refer to Checking the
Wheel Lug Nuts in the Operator's Manual
8