Specifications - Toro MMX-650E-S 60212C Operator's Manual

Voltage Block
Use the voltage block to set the operating voltage for the
machine (Figure 10).
1. Voltage block
Motor O /O Switch
N FF
The O /O switch (Figure
N FF
machine to start and stop the motor. This switch is located on
the front of the motor. It is marked (O
the O /O switch to the O
N FF

Specifications

Note: Specifications and design are subject to change without notice.
Machine Specifications
Model
Batch Capacity
Total Volume
Length
(without tow pole)
Width
Height
Weight
Axle
Motor
Figure 11
12) allows the operator of the
) and (O
N FF
position to start and run the
N
68012C
0.17 cubic m (6.0 cubic ft)
0.20 cubic m (6.9 cubic ft)
163 cm (64 inches)
86 cm (34 inches)
137 cm (54 inches)
250 kg (550 lb)
86 to 117 cm (34 to 46 inches)
extendable
1.5 hp Baldor Electric
motor. Rotate the O
stop the motor.
1. Motor O
). Rotate
68018C
0.23 cubic m (8.0 cubic ft)
0.25 cubic m (9.0 cubic ft)
193 cm (76 inches)
86 cm (34 inches)
137 cm (54 inches)
275 kg (605 lb)
86 to 117 cm (34 to 46 inches)
extendable
1.5 hp Baldor Electric
11
/O switch to the O
N FF
Figure 12
/O switch
N FF
68019C
0.23 cubic m (8.0 cubic ft)
0.25 cubic m (9.0 cubic ft)
193 cm (76 inches)
86 cm (34 inches)
137 cm (54 inches)
275 kg (605 lb)
86 to 117 cm (34 to 46 inches)
extendable
2 hp Baldor Electric
position to
FF
1
g020669