Logitech Rally Quick Setup Manual

Barco clickshare conference cx-30

Hide thumbs Also See for Rally:

Download this manual

Quick setup guide

Logitech Room Solutions for

Barco ClickShare Conference for Medium Rooms

Dear customer, thank you for

choosing the Logitech Room

Solutions for Barco ClickShare

Conference. In this guide

you will find all necessary

information to unpack, install &

connect all devices in this kit.

Step 1 – Unpack

Open the box and retrieve the 5 following boxes:

• Barco ClickShare Conference CX-30

• Barco ClickShare Tray

• Logitech Rally

• Logitech Rally Mounting Kit

Step 2 – Unpack and install the ClickShare Conference CX-30

Page 1 • Barco ClickShare Tray Conference. In this guide • Logitech Rally you will find all necessary • Logitech Rally Mounting Kit information to unpack, install & connect all devices in this kit. Step 2 – Unpack and install the ClickShare Conference CX-30...
Page 2 (steps 03 and 04). Step 5 – Unpack the Logitech accessories Logitech Rally Mounting Kit With this kit, you will be able to mount the Logitech Rally speakers in a professional way. Step 6 – Connect the devices together Now you go to the most important part of the setup: connecting all the devices.
Page 3 HDMI Display You can connect several devices to the Logitech Rally Display Hub, but there should be only one USB connection to the ClickShare Conference unit, as shown on the picture in step 6. It is important that no other USB devices are connected to the ClickShare Conference Base Unit, like KVM switches (which are currently not supported) or other peripherals.
Page 4 • Disconnect unnecessary devices, especially KVM switches and HDMI splitters (keep only one USB connection from the Logitech camera to the ClickShare Conference unit, and one HDMI cable from the Base Unit to the display) • Try to swap cables •...