Huawei SUN2000-2KTL-L1 User Manual page 26

SUN2000-(2KTL-5KTL)-L1
User Manual
Mounting Structure Requirements




Installation Angle Requirements
The SUN2000 can be wall-mounted or pole-mounted. The installation angle requirements are
as follows:


Figure 4-1 Installation angle
Installation Space Requirements

Issue 01 (2020-04-17)
The mounting structure where the SUN2000 is installed must be fire resistant.
Do not install the SUN2000 on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight of the SUN2000.
In residential areas, do not install the SUN2000 on plaster board walls or walls made of
similar materials with a weak sound insulation performance because the noise generated
by the SUN2000 may interfere with residents.
Install the SUN2000 vertically or at a maximum back tilt of 15 degrees to facilitate heat
dissipation.
Do not install the SUN2000 at forward tilted, excessive back tilted, side tilted, horizontal,
or upside down positions.
Reserve enough clearance around the SUN2000 to ensure sufficient space for installation
and heat dissipation.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
20