Huawei SUN2000-2KTL-L1 User Manual page 31

SUN2000-(2KTL-5KTL)-L1
User Manual
(1) Bolt
(4) Flat washer

To prevent dust inhalation or contact with eyes, wear safety goggles and an anti-dust mask
when drilling holes.

Wipe away any dust in or around the holes and measure the hole distances. If the holes are
inaccurately positioned, drill holes again.

Level the head of the expansion sleeve with the concrete wall after removing the nut,
spring washer, and flat washer. Otherwise, the mounting bracket will not be securely
installed on the wall.

Loosen the nut, spring washer, and flat washer of the expansion bolt at the bottom.
Figure 4-9 Installing expansion bolts
Step 3 (Optional) Install the locking screw for the DC switch.
Figure 4-10 Installing a locking screw for the DC switch
Step 4 Install the SUN2000 on the mounting bracket.
Step 5 Tighten the nuts.
Issue 01 (2020-04-17)
(2) Nut
(5) Expansion sleeve
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
(3) Spring washer
25