System Delivery Procedure
Crating the System
If the system needs to be sent back to the factory see the instructions on the container
sleeve.
Packaging the system
1. Remove the Ramps (2 bolts), and front bracket (4 bolts). Place ramps in the crating
position and secure with velcro straps.
2. Roll the system onto the base and lock the front and rear casters.
3. Position the system control panel and monitor to its lowest height.
4. Reinstall front bracket (4 bolts) and ramps 1 and 2 (2 bolts).
5. Wrap keyboard and OEM's together (printers and/or VCR if installed), with plastic film
to secure.
6. Place Accessory Box in place.
7. Install inner sleeves (8 Corro clips).
8. Install front foam support and rear foam support to secure system monitor.
9. Place accessory box in front of monitor, and spacer box at back of system.
10. Install outer sleeve (3 Corro clips).
11. Install lid. Secure with two straps around girth
Siemens
US15-101.812.01.02.02
05.10
(Fig. 1 / p.
9).
Page 39 of 40
Ultrasound
39
1.9
0
ACUSON S2000