Siemens ACUSON S2000 Installation Instructions Manual page 23

System Delivery Procedure
a) Roll the trackball to position the pointer over the name of the connected transducer.
Fig. 16: Transducer Name
b) Press the Select key.
Fig. 17:
4. Rotate the 2D knob clockwise
the screen becomes brighter.
CAUTION
Siemens
NOTE
When the system displays the transducer name, the system
has recognized the connected transducer.
Connecting or disconnecting the transducers while in imag-
ing mode may affect the image.
US15-101.812.01.02.02
05.10
(3/Fig. 11 / p. 19) to verify that the main display area of
Put the system in Freeze mode prior to connecting or
disconnecting transducers.
Page 23 of 40
Ultrasound
23
ACUSON S2000