Siemens ACUSON S2000 Installation Instructions Manual page 31

System Delivery Procedure
2. Verify the printer operation.
Use the steps listed in the following table that correspond to the S2000 printer configu-
ration:
Printer Configuration
Color Printer only
Black and White Printer
only
Color Printer and Black
and White Printer
3. For additional (black and white or color) printers that do not print in the above steps:
a) Press the 2D knob
Siemens
Complete the following steps
Verify the print function to the printer is operational:
1. Press the 2D knob
(Fig. 11 / p.
2. Rotate the C knob
with color.
3. Press the Print key
4. Press the Store key
5. Verify the image printed.
Verify the print function to the printer is operational:
1. Press the 2D knob
2. Press the Print key
3. Press the Store key
4. Verify the image printed.
Verify the print function to the color printer is operational:
1. Press the 2D knob
(7/Fig. 11 / p.
2. Rotate the C knob
with color.
3. Press the Print key
4. Press the Store key
5. Verify the image printed.
Verify the print function to the black and white printer is oper-
ational:
1. Press the 2D knob
mode.
2. Press the Print key
3. Press the Store key
4. Verify the image printed.
(3/Fig. 11 / p. 19)
US15-101.812.01.02.02
05.10
(3/Fig. 11 / p. 19)
19).
(7/Fig. 11 / p. 19)
(Fig. 34 / p. 30).
(Fig. 33 / p.
(3/Fig. 11 / p.
(Fig. 34 / p. 30).
(Fig. 33 / p.
(3/Fig. 11 / p. 19)
19).
(7/Fig. 11 / p. 19)
(Fig. 34 / p. 30).
(Fig. 33 / p.
(3/Fig. 11 / p. 19)
(Fig. 34 / p. 30).
(Fig. 33 / p.
to return to the 2D mode.
Page 31 of 40
Ultrasound
31
and then C knob
to fill the Color Box
30).
19).
30).
and then C knob
to fill the Color Box
30).
to return to 2D
30).
ACUSON S2000