System Delivery Procedure
c) Roll the trackball to position the pointer over the No Probe selection in upper-left
column.
d) Press the Select key.
Fig. 21:
e) Roll the trackball to position the pointer over the name of the connected transducer
from the transducer list.
f) Press the Select key.
Fig. 22:
3. Press the 2D knob
4. Select the name of the connected transducer from the transducer list located in the
upper-left corner of the monitor.
a) Roll the trackball to position the pointer over the name of the connected transducer.
Siemens
NOTE
This activates the port the transducer is connected to and
unfreezes the image, returning to imaging mode.
(3/Fig. 11 / p.
NOTE
When the system displays the transducer name, the system
has recognized the connected transducer.
US15-101.812.01.02.02
05.10
19).
Page 25 of 40
Ultrasound
25
ACUSON S2000