Lifting The Boiler Off The Pallet; Transporting The Boiler On Rollers - Bosch Condens 7000 F Installation And Maintenance Instructions For The Contractor

Transporting the boiler
4.2

Lifting the boiler off the pallet

NOTICE:
Boiler damage through impact!
The boiler is at risk of tipping over if it is pushed off the side of the pallet.
▶ Push the boiler off the pallet towards the burner or flue gas side.
▶ Depending on the pushing direction, remove corresponding fixing
strip ( Fig. 7).
▶ Push the boiler of the pallet in the required direction.
▶ Avoid heavy impacts or setting the boiler down too hard.
The boiler is screwed to the pallet via the lower tie bar.
▶ Remove 4 safety screws.
1
Fig. 7 Detaching the boiler from the pallet (example for illustration
purposes)
[1] Fixing bar on the flue gas side
[2] Fixing strips on the burner side
4.3

Transporting the boiler on rollers

If the path to the boiler room is level, the boiler can also be rolled.
▶ Use at least 5 pipe sections of approx. 700 mm length
(Diameter R 1¼ ") as rollers.
▶ Position the pipes approx. 400 mm apart on the floor.
▶ Lift the boiler onto the pipe sections and carefully transport it to the
installation location.
You can also use commercially available transport rollers.
14
Fig. 8
2
0010012542-001
Fig. 9
If the boiler is not to be brought into operation:
▶ Protect boiler from contamination.
Dispose of packaging in an environmentally responsible manner.
Transporting the boiler on rollers (measurements in mm)
Transporting the boiler on a furniture roller
Condens 7000 F – 6720871560 (2019/11)
0010012541-001
0010013512-001