Cleaning; Removing Debris From The Machine - Toro SGR-6 Operator's Manual

Figure 28
1. Tooth
2. Tooth holder
3. Washer
g034223
4. Nut
5. Flat land

Cleaning

Removing Debris from the
Machine
Regular cleaning and washing increases the life span
of the machine. Clean the machine directly after use,
before the dirt hardens.
Before cleaning, check that the fuel-tank cap is
properly in place to avoid getting water in the tank.
Use care when using a high-pressure sprayer,
because it can damage warning decals, instruction
signs, and the engine
Important:
Lubricate the cutting wheel bearings
after cleaning.
22