Installing An Optional Bsc Card - Huawei UPS5000 User Manual

UPS5000 Optional BSC Card
User Manual
Context
Figure 3-1 Sampling cable
(1) In-line spring
connector
Procedure
Step 1 Connect the ground cable for the ESD wrist strap, and put on the ESD wrist strap and ESD
gloves.
Issue 02 (2019-12-10)
3

Installing an Optional BSC Card

2
 A 1.5 mm sampling cable is recommended.

Install the fuse close to the power supply to be traced. The fuse breaking capacity should be at least
20 kA.
 The fuse box and sampling wiring terminal shown in the figure are for reference only. The sampling
cable length, terminal, and fuse box installation mode need to be determined based on site survey
results. The customer can also purchase and install these components by themselves.
Copyright © Huawei Technologies Co., Ltd.
(2) Fuse box (fuse: 400 V/1
A)
3 Installing an Optional BSC Card
(3) Sampling wiring
terminal
3