Table of Contents
Advertisement
6.19.4
Standard Pairing Feature
The Bluetooth Standard Pairing feature enables your Bluetooth enabled radio to search for other
Bluetooth enabled and discoverable devices.
NOTICE: Bluetooth tones, Bluetooth menu, and preprogrammed buttons must be
preprogrammed by a qualified radio technician. Check with your dealer or system administrator
for more information.
Once a device is discovered, you can initiate your radio to send a pairing request to pair with the
device.
6.19.4.1
Searching and Pairing the Bluetooth Device
Prerequisites: Ensure the Bluetooth on your device is turned on and is set to Discoverable in order
to enable your radio to detect your device in Bluetooth.
When and where to use: Bluetooth Search in Bluetooth Standard Pairing method is used to scan for
other Bluetooth devices nearby. It is set to turn off by default.
Procedure:
1 Perform one of the following actions:
•
Press the preprogrammed Bluetooth Search button.
•
or to BT. Press the Menu Select button directly below BT to access the Bluetooth feature
screen.
or
If successful, the display shows Searching for BT devices followed by the names of
Bluetooth devices found, if any. When the search timer expires, Available Dev screen shows a
list of Bluetooth devices found. To stop the search before the search timer expires, press the
preprogrammed Bluetooth Search button or the Menu Select button below Stop.
If the feature fails to initiate, the radio sounds a short, low-pitched tone. The screen shows BT
Search failed. Press the Menu Select button below Back to return to Bluetooth feature
screen, or press
2
or
to the device name and press the Menu Select button directly below Sel to connect to
the device.
The radio starts pairing to the device.
Postrequisites: To continue with Bluetooth pairing, see
Proximity Pairing (LF-MPP) Feature on page
6.19.4.2
Turning On Bluetooth Visibility
When and where to use: Turning Bluetooth visibility on enables other Bluetooth devices to search for
your radio. The visibility of the Bluetooth is set to turn off by default.
Do one of the following to turn on Bluetooth visibility. You can use the options interchangeably
depending on your preference and the programmed functions.
Procedure:
•
Turn on Bluetooth visibility using the radio menu BT:
to Search Devices and press the Menu Select button directly below On.
or the Menu Select button below Exit to return to Home screen.
100.
Chapter 6: Advanced Features
Pairing with Low Frequency-Motorola
MN004476A01-AE
101
Advertisement
Table of Contents
