Using The Time-Out Timer; Time And Date Setup; Editing The Time And Date - Motorola APX 8000H User Manual

a. or to VMut.
b. Press the Menu Select button directly below VMut.
The display momentarily shows Voice mute off, and you hear a short tone, indicating that the
feature is disabled or the display shows momentary Voice mute on, and you hear a short tone,
indicating that the feature is enabled.
6.24.12

Using the Time-Out Timer

When and where to use: This feature turns off the transmitter of your radio. You cannot transmit
longer than the preset timer setting.
If you attempt to do so, the radio automatically stops your transmission, and you hear a talk-prohibit
tone.
The timer is defaulted at 60 seconds, but it can be preprogrammed from 15 to 465 seconds, in 15-
second intervals, or it can be disabled entirely for each radio mode, by a qualified radio technician.
NOTICE: You hear a brief, low-pitched, warning tone four seconds before the transmission
times out.
Procedure:
1 Hold down the PTT button longer than the preprogrammed time.
You hear a continuous talk prohibit tone. The transmission is cut-off and the LED goes out.
2 Release the PTT button.
The timer resets.
3 To re-transmit, press the PTT button.
The time-out timer restarts and the LED lights up solid red.
6.24.13

Time and Date Setup

The time setting is a 12-hour clock. The display shows 12:00AM. The default setting for the domestic
date shows MDY.
Contact your system administrator for more information.
6.24.13.1

Editing the Time and Date

Procedure:
1 or to Clck.
2 Press the Menu Select button directly below Clck.
The display shows the current setting of the radio.
3 Press the Menu Select button directly below Edit.
The first item blinks.
4 Perform one of the following actions:
• or to change the selected item.
MN004476A01-AE
Chapter 6: Advanced Features
121