Sending An Emergency Alarm And Call With Hot Mic - Motorola APX 8000H User Manual

Hide thumbs Also See for APX 8000H:
Table of Contents

Advertisement

MN004476A01-AE
Chapter 6: Advanced Features
The radio exits Emergency Alarm and enters the Emergency Call state when one of the
following scenarios occur:
You receive the dispatcher acknowledgment. The display shows Ack received.
You receive no acknowledgment. The display shows No acknowledge.
You press the PTT button while in the Emergency Alarm mode.
If unsuccessful, you hear the radio sounds a short low-pitched tone to indicate the selected
channel does not support emergency and rejects to launch emergency mode.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
3 Press and hold the PTT button. Speak clearly into the microphone.
4 Release the PTT button to end the transmission and wait for a response from the dispatcher.
5 To exit Emergency Call, press and hold the preprogrammed Emergency button for about a
second.
Turning off the radio also cancels the emergency state.
6.7.9

Sending An Emergency Alarm and Call with Hot Mic

This feature allows you to send an Emergency Alarm and Call with hot mic to a group of radios.
When and where to use: Your radio must be programmed for this type of operation.
Follow the procedure to send Emergency Alarms and Call with hot mic on your radio.
Procedure:
1 Press the preprogrammed Emergency button.
If successful, the display shows Emergency on the current zone and channel. A tone sounds
and the LED blinks red momentarily.
The radio exits Emergency Alarm and enters the Emergency Call state when one of the
following scenarios occur:
You receive the dispatcher acknowledgment. The display shows Ack received.
You receive no acknowledgment. The display shows No acknowledge.
If unsuccessful, a tone sounds to indicate the selected channel does not support emergency and
rejects to launch emergency mode.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
3 The microphone remains active for the hot mic time specified in your radio's codeplug
programming.
4 To exit Emergency Call, press and hold the preprogrammed Emergency button.
Turning off the radio also cancels the emergency state.
68

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apx 6000 3Apx 6000li 32.5

Table of Contents