Table of Contents
Advertisement
6.2.6.1
Entering the Dynamic Zone to Select a Dynamic Channel
Procedure:
1
or to Zone then press the Menu Select button directly below Zone.
The display shows the Zone screen.
2
or
to <# Dynamic Zone Channels>.
3 Perform one of the following actions:
•
Press the Menu Select button below Sel to select.
•
Press the Menu Select button below Exit to exit.
If you have selected one of the Dynamic Zone Channels list, the display returns to Home screen
with the selected <# Dynamic Zone Channels> shown on the screen.
If you have selected Exit without selecting any Dynamic Zone Channels list, the display returns
to Home screen without any changes.
6.2.6.2
Saving a Channel in the Dynamic Zone from List Selection
Prerequisites: The radio must be in Dynamic Zone in order to perform this operation.
Procedure:
1
or to ZnPr. Press the Menu Select button directly below ZnPr to enter Program Zone
screen.
2 Press the Menu Select button directly below Edit.
The display shows Search Options screen.
3
or
to List Selection. Press the Menu Select button directly below Sel .
The display shows Select Zone screen.
4
or
to the required zone. Press the Menu Select button directly below Sel .
The display shows Select Chan screen.
5
or
to the required channel. Press the Menu Select button directly below Sel .
The display shows Channel updated.
6 Press the Menu Select button directly below Exit to return to Home screen.
6.2.6.3
Deleting a Channel in the Dynamic Zone
Prerequisites: The radio must be in Dynamic Zone in order to perform this operation.
3
# indicates number of the channel on the 16-Position Switch which are numbered from 1 to 16.
Chapter 6: Advanced Features
3
MN004476A01-AE
55
Advertisement
Table of Contents
