Canon imagePRESS C800 Series Technical & Service Manual page 146

DIP switch board
DIP switch State
Power switch
The Power switch (push button) located on the DIP switch board is not used.
The behaviour of the switch is equal to the "Energy safer key" on the Canon user interface.
LEDs
The DIP switch board has two LEDs.
The Power LED is used to identify wether the engine is energized or not.
NOTE
If the Power LED is On and the Tally LED is OFF this could indicate a problem during the start-up
sequence. The problem occurs before the main controller software is fully operational.
LED
Tally LED
Power LED
146 Chapter 11 - Appendix
Colour
Amber
Green
Model Boot Mode
PRISMAsync Safe download
mode
(2+8 key boot)
Canon/Fiery -
Function
Processing / data indi-
cator
Main power indicator
IP Address
134.188.254.21
-
Information
Controlled by main
controller software
Controlled by hard-
ware