Canon imagePRESS C800 Series Technical & Service Manual page 33

• USB-stick to scan to and/or print from
• USB-stick to store log-files
• USB-stick for installation of patches and licenses
5. Schedule button
Access the 'Schedule' view to manage the jobs in the schedule.
6. Jobs button
Access all functions to print, copy and scan documents.
• Manage or change the settings of jobs in the lists of Waiting jobs, Scheduled jobs and
Printed jobs.
• Carry out copy jobs and scan jobs.
7. Paper tray button
Get direct access to the tray section on the operator panel to do the following:
• Check the content of all paper trays.
• Load a new media type into a paper tray.
• Change the media type which is available in one of the paper trays.
8. System button
Access the System section to do the following, for example:
• Check the status of the toner, staples and other supplies.
• Read the counters
• Start maintenance
• Set up the preferred work flows
• Change a number of default system settings
• Adjust the brightness and contrast of the LCD panel
• Shut down the host machine
• View the content of the Media catalogue or add temporary media to the Media catalogue
9. Dashboard
The dashboard displays information about the system status such as:
• Information about the current printing process
• Information about operator intervention that is required soon
• Information about errors
• Information about the status of the toner reservoir and staple cartridges
10. Status LED
This LED describes the status of the system and also applies for the operator attention light.
• Green:
The machine is busy printing. No operator attention required
• Orange:
The machine will stop soon, e.g. because an output location is almost full or more paper is
required
• Red:
The machine has stopped, e.g. because a required media type is not available or an error
has occurred. Operator attention is required.
The operator panel
Chapter 4 - Using the PRISMAsync 33