Canon imagePRESS C800 Series Technical & Service Manual page 73

Step Action
8 Install the board into the PCI slot.
• Firmly press the board in the PCI connector. Use the PCI 4 port. It is the lowest PCI
connector on the Motherboard.
Fasten the AUX control board.
9
• Fix the board with a single screw on the PCI bracket side with a Philips screwdriver
Connect the internal connectors to the board.
10
Access internal components on page 68
• See
11 Re-install middle bracket and side cover.
• Make sure the fixing on the middle bracket is in position. It should fit exactly on the
AUX control board.
Replace the AUX control board
Chapter 7 - Service procedures 73