Toshiba V Series Operation Manual page 58

Chapter 9 Message Transmission
(11)
Note1: The completion status information when executing this request is stored in the
Note2: When an error response (M_RLT=1) comes from a server side node, "-5106
(12)
9
Note1: The completion status information when executing this request is stored in the
Note2: When an error response (M_RLT=1) comes from a server side node, "-5106
38
Log clear
CMD
F
+0 65014
STATUS area of the XMIT_T function block. See "Appendix Completion Status"
for the details of the completion status information.
(M_RLT= abnormal receive)" is stored in the STATUS area of a XMIT_T function
block. The error code of a server side node is not stored in that area.
Message loopback
CMD
F
+0 65015
+1 Transmit data length
Transmit data
STATUS area of the XMIT_T function block. See "Appendix Completion Status"
for the details of the completion status information.
Transmit data length: Byte length of transmit data
Receive data length:
Reserve transmit data length+2 bytes as data area.
If M_RLT=0 and received data exceeds the data area byte length, only the data
area length worth of data is set.
(M_RLT= abnormal receive)" is stored in the STATUS area of a XMIT_T function
block. The error code of a server side node is not stored in that area.
Figure 9-13 Message loopback request
model 3000 FA Control Network [FL-net(OPCN-2)] FL311/FL312 Module Operation Manual
0
+0
Figure 9-12 Log clear request
0
+0
Byte length of received data
DATA
F
None
DATA
F
Receive data length
Receive data
0
0