Motorola ML1000 Full User Manual page 13

For pluggable equipment, the socket-outlet (power adaptor) shall be installed near
the equipment and shall be easily accessible.
Caution: To reduce risk of personal injury, fire, or damage use only the power
adaptor supplied. This power adaptor is intended to be correctly orientated in a
vertical or floor mount position.
1. Connect the telephone line cords:
If you have two 2-line wall jacks installed in your home or office, plug one end of the
straight telephone line cord tagged as "Line 1+2" into the jack marked "LINE 1+2" on the
back of the Motorola ML1000 base. Plug the other end of the line cord into the wall jack.
Plug the other line cord into the jack marked "LINE 3+4" on the back of the phone, with
the other end plugged into the wall jack as well.
If you have four single-line wall jacks installed in your home or office, simply plug each
single line cord into the corresponding port on the back of the Motorola ML1000 base
phone.
2. Connect the handset cord:
Connect one end of the coiled handset cord to the jack on the side of the base and the
other end into the jack in the handset, then place the handset in the cradle.
13