Connecting Your System; To Register A Motorola Ml1100 Wireless Deskphone To The System; To Register A Motorola Ml1200 Cordless Handset To The System; To Remove A Motorola Ml1100 Or Ml1200 From The System - Motorola ML1000 Full User Manual

7.4

Connecting your System

Once the Motorola ML1000 phone is set up and has dial tone, it is ready to be wirelessly
connected to the other Motorola ML1100 phones and Motorola ML1200 handsets that will
make up your system. Once you have unboxed and plugged in your Motorola ML1100 phone or
Motorola ML1200 handset, they will be ready to register to the base.
7.4.1

To Register a Motorola ML1100 Wireless Deskphone to the System

1. On your Motorola ML1000 base, press
2. Using the navigation button, move the indicator to
softkey.
3. Select Register Phone
base in registration mode as it searches for another phone to register.
4. On your Motorola ML1100 wireless deskphone, press
registration mode and search for the base.
5. If registration is successful, both phones will beep and display
registration is not successful, move the phones closer together and try again.
7.4.2

To Register a Motorola ML1200 Cordless Handset to the System

1. On your Motorola ML1000 base, press
2. Using the navigation button, move the indicator to
softkey.
Register Phone
3. Select
base in registration mode as it searches for another phone to register.
4. On your Motorola ML1200 cordless handset, press
mode and search for the base.
5. If registration is successful, both phones will beep and display
registration is not successful, move the phones closer together and try again.
NOTE
If your Motorola ML1100 or ML1200 does not display the
message on the display when you plug it in, the
Add/Remove Phones
7.4.3

To Remove a Motorola ML1100 or ML1200 from the System

To remove a Motorola ML1100 or ML1200 from the system you must deregister it from the
Motorola ML1000 base phone.
1. On your Motorola ML1000 base, press
2. Using the navigation button, move the indicator to
softkey.
3. Move the indicator to
4. Select from the list the extension you wish to remove and press
Yes
pressing softkey.
NOTE
Removing an extension from the system will leave it unable to make or receive calls until it is
re-registered to a Motorola ML1000 base.
14
option and press
option and press
menu.
Deregister Phone
Menu
softkey.
Add/Remove
Select softkey. This will put the Motorola ML1000
Reg
softkey. It will also enter
Menu softkey.
Add/Remove
Select
softkey. This will put the Motorola ML1000
Reg
softkey. It will also enter registration
Press "REG" To Initiate Registration
Register Phone
Menu
softkey.
Add/Remove
and press Select softkey.
Phones. Press Select
Registration Complete!
Phones. Press Select
Registration Complete!
option is available in the
Phones. Press Select
Select
softkey. Confirm by
If
If