Front Bezel; Removing The Front Bezel - Dell OptiPlex 7080 Small Form Factor Service Manual

About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the installation procedure.
Steps
1. Slide the intrusion switch into the slot on the chassis.
2. Connect the intrusion switch cable to the connector on the system board.
Next steps
1. Install the side cover.
2. Follow the procedure in

Front bezel

Removing the front bezel

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
after working inside your computer.
before working inside your computer.
Field service information 21