Coin-Cell Battery; Removing The Coin-Cell Battery; Installing The Coin-Cell Battery - Dell OptiPlex 7080 Small Form Factor Service Manual

2. Install the side cover.
3. Follow the procedure in

Coin-cell battery

Removing the coin-cell battery

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure.
Steps
1. Using a plastic scribe, gently pry the coin-cell battery out of the socket on the system board.
2. Remove the coin-cell battery from the system.

Installing the coin-cell battery

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the coin-cell battery and provides a visual representation of the installation procedure.
after working inside your computer.
before working inside your computer.
Field service information 39