Installing The Hard-Drive Bracket - Dell OptiPlex 7080 Small Form Factor Service Manual

Steps
1. Place the hard-drive onto the caddy aligning the posts on the left side with the slots on the hard-drive. Push the tabs from the right
side of the caddy away from the hard-drive until the hard-drive clicks in place.
2. Connect the power cable and hard-drive cable to the connectors on the hard drive.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Installing the hard-drive bracket

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive bracket and provides a visual representation of the installation procedure.
26 Field service information
after working inside your computer.