4. Install the single (M2x3) screw to secure the WLAN card.
Next steps
1. Install the
2.5 in. hard drive
2. Install the
front
bezel.
3. Install the
side
cover.
4. Follow the procedure in
Heat sink
Removing the fan assembly
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.
36
Field service information
assembly.
after working inside your
computer.
before working inside your
computer.