CO NFIG U R AT IO N
6.2
Log onto AWIN GW100 WirelessHART Gateway
1. Apply power to the gateway and run a browser program (such as, Internet Explorer or
Chrome) on your computer. Wait until the ST LED is on (not flashing), indicating the boot-
up procedure is complete and the AWIN GW100 is operational.
2. Enter the following IP address into the "Address" field of the browser:
If a browser prompts security warning (due to certificate) then proceed.
3. Provide the following details on the login screen and select Login.
Enter the default login credentials:
–
Username: admin
–
Password: admin
6.3
View Gateway Information
After login, the home page shows the following basic information about the AWIN GW100
gateway.
3BN P 102 9 12 C
LOG O NTO AWI N GW 100 W IR E L ESS HA R T G AT EW AY
Figure 9: Login screen
https://172.16.16.1
2 9