Wirelesshart Profile Configuration; Figure 13: Gateway Profile Configuration Screen; Table 7: Information Screen Fields - ABB AWIN GW100 User Manual

WIR E L ES SH AR T PR OF IL E CONF IG U R ATI ON
Field
LAN IP Address
LAN Subnet Mask
LAN Default Gateway
LAN MAC Address
WirelessHART AP MAC Address
Firmware Version
Hardware Version
6.5

WirelessHART Profile Configuration

1. Click Configuration > WirelessHART > Gateway Profile in the left navigation column to
view and select the WirelessHART Gateway Profile.
There are five profiles available as shown in
32

Table 7: Information screen fields

Description
The logical address of the LAN port. The IP address
uniquely identifies this device on the network.
Bit mask used to tell how much of an IP address identi-
fies the subnetwork the host is on, and how much
identifies the host. This subnet mask applies to the
10/100 Mbps LAN port.
A node on the network that serves as an access point
to a different network for the LAN port.
(Media Access Control address, MAC address) is the
address for the network card.
MAC address for the WirelessHART radio in the gate-
way.
Version of software loaded into the AWIN GW100.
Shows version and revision level of the circuit boards.

Figure 13: Gateway Profile Configuration screen

Table 8.
CO NFIG U R AT IO N
3BN P 102 9 12 C