Figure 14: Network Configuration Screen; Table 10: Wirelesshart Network Parameters - ABB AWIN GW100 User Manual

CO NFIG U R AT IO N OF WIR E LE SS HAR T N ET W OR K
Various WirelessHART Network Parameters are as follows:
Field
WirelessHART Network ID
Accept Common Join Key
Common Join Key
Require Access List Entry
MAC Address
Join Key
Key Generator
Migrate Network
Get Advertising Status
34

Figure 14: Network Configuration screen

Table 10: WirelessHART Network Parameters

Description
Can be provided in hexadecimal or decimal format.
To enable the Common Join Key security mode, click the Ac-
cept Common Join Key radio button. See
for details.
If "Accept Common Join Key" is enabled then provide com-
mon join key in hexadecimal format with 32 characters. De-
vices that have this Common Join Key can join the network.
See Security section for details.
Allows access via an external join list in addition to a Join
Key. See Security
Network card address for the corresponding WirelessHART
device being configured.
A device that has this Join Key must also have the corre-
sponding MAC address to join the network.
This functionality automatically creates a join key.
When selected, this functionality migrates the complete net-
work (AWIN GW100 gateway and connected WirelessHART)
devices to the new WirelessHART network ID or Join Key or
both. Depending on what was changed by the user on the
page. This option is related to Accept Common Join Key
functionality.
When active advertising is "ON," the AWIN GW100 sends fre-
quent beacons to join the network.
section for details.
CO NFIG U R AT IO N
Security section
3BN P 102 9 12 C