Basic Features Of Awin Gw100 Gateway; Get Familiar With Awin Gw100; Table 4: Leds Information - ABB AWIN GW100 User Manual

G ET FA MI LI AR W I TH AW I N GW 10 0
3

Basic Features of AWIN GW100 Gateway

The AWIN GW100 is a WirelessHART gateway. It can connect with up to 24 WirelessHART field
devices and convert the HART data to Modbus TCP data for easy integration into almost any
ModbusTCP based host system. The connection can be established via the onboard Ethernet
port. HART to Modbus TCP mapping is available in both automatic and manual modes. In au-
tomatic mode, gateway automatically assigns registers to available parameters. Whereas, in
case of manual mode the user has to supply a custom Modbus list in the form of an XML file.
Important notice (RF exposure)
Installation of this gateway's antenna must be performed in a manner that will pro-
vide at least a 3 cm (1.2 in.) clearance from the front radiating aperture to any user
or member of the public.
This product is intended for fixed installation applications.
FCC Part 15 compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must ac-
cept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by ABB will void the user's authority to op-
erate the equipment.
– FCC Part 15.247
– ISC RSS 2101
3.1

Get Familiar with AWIN GW100

The AWIN GW100 is a DIN rail-mount wireless device with a protection rating of IP20 (see
ure 1). The gateway has an RJ45 connector for connection of Ethernet devices. The Wire-
lessHART antenna connector allows remote mounting of the antenna. The gateway comes
with built-in LEDs, there description is provided in
ST
MESH
LINK
DATA
ERR
16
BAS IC FE ATU R ES OF AW I N GW 100 G AT EWAY
Table

Table 4: LEDs Information

LEDs Information
Shows power and device status
Reports if WirelessHART devices connected
Shows LAN connection status
Indicates traffic on LAN port
Reports the device error
4.
3BN P 102 9 12 C
Fig-