Summary of Contents for Toro Ultra Sonic Boom 130-8229
Page 1
5800 Turf Sprayer Model No. 130-8229 Installation Instructions Note: The Ultra Sonic Boom Leveling Kit (Toro part number 41219) is required to install this kit. Note: Determine the left and right sides of the machine from the normal operating position. WARNING...
Page 2
3. Loosen the 2 hydraulic connectors on the right side and the gauge port on the left side of the hydraulic manifold block (Figure Installing the Valve-Mount Bracket Parts needed for this procedure: Valve-mount bracket Hydraulic manifold block (ordered separately) Hydraulic fitting (ordered separately) Procedure Note: You can find the hydraulic manifold block and...
Page 3
7. Install the valve-mount bracket using the 2 bolts (5/16 10. Install the new hydraulic manifold block onto the x 1 inch) and 2 locknuts (5/16 inch) that you previously valve-mount bracket with the 2 bolts (5/16 x 3 inch) removed (Figure and 2 locknuts (5/16 inch) that you previously removed...
Page 4
2. Remove the 2 bolts and install the mounting bracket to the machine seat frame (Figure Mounting the Electronic Controller Parts needed for this procedure: Mounting bracket Wiring harness Electronic controller (ordered separately) Bolt (1/4 x 1-1/8 inch) (ordered separately) Locknut (1/4 inch) (ordered separately) Procedure Figure 7...
Page 5
5. Connect the terminal of the wiring harness into the electronic controller (Figure Note: The controller connection is keyed and can be connected in only 1 way. Figure 9 1. Electronic controller 2. Wiring harness terminal 6. Route the wiring harness to the hydraulic manifold. Figure 10 7.