Epson SpectroProofer Setup And Maintenance page 10

10 | Setting Up the SpectroProofer
Caution:
Do not touch the white
surface of the tile.
For the 44" model, attach the first backing plate on the right side of the
printer, then attach the second backing plate to its left. Make sure the
plates hook together as shown. Ensure that both plates rest flush against
the printer and don't move when you try to slide them.
5. Insert the calibration tile into the holder. Rotate the cover on the back of
the holder. Drop in the tile with its white surface facedown. Replace the
cover.
10