Epson SpectroProofer Setup And Maintenance page 21

5. Remove the backing plate(s) from the printer.
6. Use a soft, lint-free cloth to clean any dust or dirt from the surface of the
calibration tile and backing plate(s).
If necessary, dampen the cloth with water to clean the surface. Then use
another cloth to wipe it dry.
7. If you noticed that ink is transferring to the front surface of your paper,
you may need to clean the paper presser. Slide the carriage to the right,
then raise the paper presser.
Maintenance and Problem Solving
2
21
| 21
1