Connecting The Cables - Epson SpectroProofer Setup And Maintenance

12 | Setting Up the SpectroProofer
Warning:
Make sure the printer and
the SpectroProofer are
unplugged from the AC
outlet before connecting
the SpectroProofer cables.
Note:
To install the SpectroProofer,
you must disconnect the
Auto Take-up Reel from the
option port on the back of
the printer.

Connecting the Cables

The 44" SpectroProofer has a secondary USB port that can be used to
connect the optional Auto Take-up Reel (available for the Epson SureColor
P8000/P9000 only). The 24" SpectroProofer does not have this port.
1. Open the cover on the right side of the SpectroProofer.
2. Plug the USB-B end of the included SpectroProofer USB cable into the
square port marked with the
Auto Take-up Reel
SpectroProofer
If you've also installed the optional Auto Take-up Reel, plug its
USB cable into the flat port marked with the
(44" model only).
printer symbol.
12
take-up reel symbol