Steps
1. Press the release tabs on the hard drive assembly and slide it towards the front of the system to disconnect it from the
connector on the system board.
2. Lift the hard drive assembly from the system.
NOTE:
Note the orientation of the hard drive so that you can replace it correctly.
Removing the hard drive bracket
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
top cover (side bezel)
4. Remove the
front
bezel.
5. Remove the
2.5 in. hard-drive
32
Disassembly and reassembly
before working inside your
assembly.
computer.