How Do I Power On A Management Unit Via The Local Console - Fujitsu BS2000 SE Series Quick Manual

2.3 How do I power on a Management Unit via the local console?

Requirement
You are on the server rack of the SE server.
Procedure
> Open the server rack
> Pull out the tray with the local console and flip up the screen
> Press the power-on button on the MU
i By default the local console is attached to the MU. If the connection is attached to the Server Unit, switch
over to the MU using the console switch menu (press the HOT KEY to call it).
The MU powers itself on and starts up. The startup messages are output on the local console. As soon as the
system is ready, you receive the login request.
> Enter account and password of an administrator account
i When the SE server is supplied, an initial password is set for standard account
requested at the service. If it has already been changed (or you are using a different account), you must
enter the current password (see also
> Click Login
After a successful login the Gnome Desktop is loaded.
> Click Computer in the task bar (bottom left), to open the application menu:
> Double-click the Firefox icon to open the browser.
> Enter localhost into the address bar of the browser (or alternatively the FQDN of the powered-on MU) and
press enter:
section "How do I log in on the SE Manager?"
admin , which can be
).
10