How Can I Boot The Bs2000 Via The Se Manager - Fujitsu BS2000 SE Series Quick Manual

3.4 How can I boot the BS2000 via the SE Manager?

Requirement
Login into the SE Manager as administrator, BS2000 administrator or a privileged operator.
The Power status of the SU shows the value
Procedure
> Switch to the BS2000 system's
in native BS2000 mode to the native BS2000 system:
in VM2000 mode to the monitor system:
> In the Actions group, select
You can open a BS2000 console to observe the startup:
Open
To do this, click in the
opens and the console is loaded. There you will see the messages issued during BS2000 IPL. When the NSI0000
message displays "System ready", BS2000 boot is essentially complete. At the console, you can continue to
monitor the running BS2000 session and react to system messages if necessary (e.g. answer a mount message).
Use the F3 and F4 keys to scroll backwards and forwards in the console input history. With the keys Ctrl + d or by
entering ::c you end the console.
For further administration tasks in BS2000, you must log on to BS2000, see
BS2000 dialog?" .
ON .
Operation tab of the SU:
BS2000 IPL and click
Console and dialog
group by the
Execute :
BS2000 Console
function. A BS2000 console window
section „How do I open or close a
25