How Do I Power Off Server Units And Other Units - Fujitsu BS2000 SE Series Quick Manual

3.8 How do I power off Server Units and other Units?

Shutting down the Server Unit or immediately powering it off
Requirement
Login as administrator, BS2000 administrator or operator
The unit is powered on (
i
The possible actions depend on the situation and unit. If no action is possible, the tooltip shows the
reason.
In case of an SU /390, an existing connection to the hardware interface is required.
Procedure
Units
> In the table click the
> In the dialog box which then appears, select the option
Execute
action with . When shutting down, the BS2000 systems on the SU x86 are shut down gracefully and
the system waits for termination, if configured.
i
Only Power off immediately
the BS2000 console (see
shutdown on the
The Server Unit is shut down or powered off immediately.
Power status displays the value
Power Off
icon by the desired SU:
is available for the SU /390. In this case shut down is possible only via
section "How do I open a BS2000 console?"
Operation tab of the SE Manager.
ON ).
Shut down or Power off immediately
) or via the action
and confirm the
BS2000
30