Introduction; Proper Handling; Scope Of Supply; Control Elements - Silvercrest 113854 Operation And Safety Notes

Introduction

Wireless Socket Set
Introduction
Q

Proper handling

Q
The radio-controlled socket set is suitable
for switching electrical equipment on and
off by remote control. Any alterations to
this device are not in accordance with
regulations and could represent signifi-
cant risk of accidents. The manufacturer
does not accept liability for any damage
caused through the device not being
used in accordance with the regulations.
This device is not intended for commercial
use.

Scope of supply

Q
After you have unpacked this set, please
check to make sure all the contents are
complete.
4 Remote controlled sockets
1 4-channel remote control
2 Batteries AAA (for remote control)
1 Set of operating instructions

Control elements

Q
Remote control (fig. A):
Power indicator light
1
Channel ON / OFF button Channel
2
A, B, C, D
Master ON / OFF switch
3
Battery compartment lid
4
6 GB
Remote-controlled socket (fig. B):
LED power indicator
5
Child protection socket
6

Technical data

Q
Wireless Socket Set
RC DS1 4001-A FR 3726
Remote control
RCT DS1 AAA-A 3726:
Batteries:
Transmission
frequency:
Licensing:
Range:
Radio-controlled sockets
RCR DS1 3711-A IP20 FR 3726:
Rated voltage:
Breaking capacity: 16 A, 3,680 W
Standby power
consumption:
Transmission
frequency:
Advice: The radio-controlled sockets
each have a child protection socket
which significantly increases safety at
home. The contacts are protected in
such a way that children cannot stick
2 x AAA, each 1.5 V
433.92 MHz
The system is li-
censed for general
use, is free of charge
and does not re-
quire registration.
Depending on the
circumstances
approx. 40 m under
optimum circum-
stances.
230 V ~ 50 Hz
< 0,7 W
433.92 MHz
6
,