Installation and Setup
For increased availability, follow these power recommendations:
•
Connect the power supply and cooling modules to different power sources on
separate circuits. See Figure 2-7.
•
Connect two power supply and cooling modules to UPS systems and connect
the other module to a different source of power.
Figure 2-7: Recommended PS5500 Power Configuration
You must use the cable management system to organize your power (and network)
cables. The cable management system also enables you to open the chassis cover
without dislodging the cables.
The cable management system consists of two wire assemblies. One wire
assembly has three arms, three clamps, and six fabric hook-and-loop fasteners.
One wire assembly has one arm, two clamps, and three fabric hook-and-loop
fasteners. See Figure 2-8.
Installing Array Hardware
2–17