Silvercrest SFW 350 D2 Operating Instructions Manual page 31

Assembling the kibbeh attachment
Unfold the fold-out side . There you will find the step-by-step illustrations for as-
sembling the appliance .
1) Remove the meat grinder casing 6 as described under "Assembling the
meat grinder" .
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6 .
NOTICE
► To use the kibbeh attachment r, neither the cross blade 9 with the spring 8,
nor a cutting or sausage disc 0/e are required! Remove these from the
meat grinder casing 6 if necessary .
3) Coat all metal parts with cooking oil .
4) Insert the two plastic parts of the kibbeh attachment r so that the fixings on
the bottom kibbeh attachment r ring are located in the openings in the meat
grinder casing 6 .
5) When everything has been attached correctly, screw the ring clamp q back
on hand-tight .
6) Assemble the meat grinder casing 6 as described under "Assembling the
meat grinder" .
Assembling the biscuit attachments
Unfold the fold-out side . There you will find the step-by-step illustrations for as-
sembling the appliance .
1) Remove the meat grinder casing 6 as described under "Assembling the
meat grinder" .
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6 .
NOTICE
► To use the biscuit attachment 1, neither the cross blade 9 with the spring 8,
nor a cutting or sausage disc 0/e are required! Remove these from the
meat grinder casing 6 if necessary .
3) Coat all metal parts with cooking oil .
4) Pull the pattern strips 1 away from the front of the biscuit attachment 1 .
5) First place the plastic disc and then the metal disc of the biscuit attachment 1
into the meat grinder casing 6 (see fold-out side) . Insert the biscuit attach-
ment 1 . so that the fixings on the biscuit attachment 1 . are located in the
openings in the meat grinder casing 6 .
6) After everything has been correctly assembled, screw the ring clamp q
back on hand-tight .
│ GB │ IE
■ 28
SFW 350 D2