Table of Contents
Advertisement
3 The massage heads rise up and stop where they least
contact the body.
Massage
Head
4 A double beep and the flashing of
massage heads are being finely adjusted to the shoulder position.
[Shoulder Position
Adjustment Mode]
5 When the shoulder position is matched, press
begin the program.
•
The program will begin automatically in 15 seconds if the
Notes
•
After the shoulder position has been fixed, the Leg/foot massage section
may raise up based on the height for a person short in height.
(To make sure that the feet can reach the sole section when
simultaneously using the leg/foot massage.)
•
The shoulder position can be adjusted whenever the massage is operating.
When using "随心选择 (MANUAL)", it can not be adjusted.
Be sure to put your head and shoulders on the backrest
then start the massage.
•
Do not move your head and shoulders away from the
backrest until the shoulder position is determined. If
the shoulder confirmation does not work well, an error
will display (U10), and the operation might end. (See
page E30.)
indicate that the
<How to adjust>
Press
to adjust the position.
(Each press moves the massage
heads approximately 1.5 cm.)
<Target shoulder position>
Too high
Correct position of the massage head
(The point where the tapping action
should be felt.)
Too low
to
button is not pressed.
E16
Advertisement
Chapters
Table of Contents
